nix: add just

fish/completions/sdk.fish

@@ -1,11 +1,11 @@
 # Defines autocompletion for SDKMAN!
 
-# Copyright (c) 2018 Raphael Reitzig
+# Copyright (c) 2018-2023 Raphael Reitzig
 # MIT License (MIT)
 # https://github.com/reitzig/sdkman-for-fish
 
 # Guard: SDKMAN! needs to be installed
-if not test -f "$HOME/.sdkman/bin/sdkman-init.sh"
+if not test -f "$SDKMAN_DIR/bin/sdkman-init.sh"
     exit 0
 end
 
@@ -88,13 +88,13 @@ complete -c sdk -f -n '__fish_sdkman_no_command' \
     -d 'Install new version'
 complete -c sdk -f -n '__fish_sdkman_using_command i install' \
         -a "(__fish_sdkman_candidates)"
+# TODO complete available versions --> issue #4
 complete -c sdk -f -n '__fish_sdkman_specifying_candidate i install' \
-            # TODO complete available versions --> #4
             -a 'a.b.c' \
             -d "version list unavailable"
 complete -c sdk -f -n '__fish_sdkman_specifying_candidate i install' \
             -a 'x.y.z' \
-            -d "Add your own; specify path!"
+            -d "Specify path to install custom version."
 # Implicit: complete files as fourth parameter
 complete -c sdk -f -n '__fish_sdkman_command_has_enough_parameters 3 i install'
                     # block
@@ -165,16 +165,9 @@ complete -c sdk -f -n '__fish_sdkman_no_command' \
 complete -c sdk -f -n '__fish_sdkman_command_has_enough_parameters 0 v version'
         # block
 
-# broadcast
-complete -c sdk -f -n '__fish_sdkman_no_command' \
-    -a 'b broadcast' \
-    -d 'Display broadcast message'
-complete -c sdk -f -n '__fish_sdkman_command_has_enough_parameters 0 b broadcast'
-        # block
-
 # help
 complete -c sdk -f -n '__fish_sdkman_no_command' \
-    -a 'h help' \
+    -a 'help' \
     -d 'Display help message'
 complete -c sdk -f -n '__fish_sdkman_command_has_enough_parameters 0 h help'
         # block
@@ -212,15 +205,39 @@ complete -c sdk -f -n '__fish_sdkman_command_has_enough_parameters 0 update'
 # flush
 complete -c sdk -f -n '__fish_sdkman_no_command' \
     -a 'flush' \
-    -d 'Clear out caches'
-complete -c sdk -f -n '__fish_sdkman_using_command flush' \
-        -a 'broadcast' \
-        -d 'Re-download news'
-complete -c sdk -f -n '__fish_sdkman_using_command flush' \
-        -a 'archives' \
-        -d 'Remove downloads'
+    -d 'Clear out archives and temporary storage folders'
 complete -c sdk -f -n '__fish_sdkman_using_command flush' \
         -a 'temp' \
-        -d 'Clear installation prep folder'
+        -d 'Clear out staging work folder'
+complete -c sdk -f -n '__fish_sdkman_using_command flush' \
+        -a 'version' \
+        -d 'Flush version file'
 complete -c sdk -f -n '__fish_sdkman_command_has_enough_parameters 1 flush'
             # block
+
+# env
+complete -c sdk -f -n '__fish_sdkman_no_command' \
+    -a 'e env' \
+    -d 'Load environment from .sdkmanrc file'
+complete -c sdk -f -n '__fish_sdkman_using_command e env' \
+        -a 'init' \
+        -d 'Initialize .sdkmanrc file'
+complete -c sdk -f -n '__fish_sdkman_using_command e env' \
+        -a 'install' \
+        -d 'Install all candidate versions listed in .sdkmanrc'
+complete -c sdk -f -n '__fish_sdkman_using_command e env' \
+        -a 'clear' \
+        -d 'Unload currently loaded environment'
+complete -c sdk -f -n '__fish_sdkman_command_has_enough_parameters 1 e env'
+            # block
+
+# home
+complete -c sdk -f -n '__fish_sdkman_no_command' \
+    -a 'h home' \
+    -d 'Show installation folder of given candidate'
+complete -c sdk -f -n '__fish_sdkman_using_command h home' \
+        -a "(__fish_sdkman_candidates_with_versions)"
+complete -c sdk -f -n '__fish_sdkman_specifying_candidate h home' \
+            -a "(__fish_sdkman_installed_versions)"
+complete -c sdk -f -n '__fish_sdkman_command_has_enough_parameters 2 h home'
+                # block

fish/conf.d/fzf.fish

@@ -14,8 +14,9 @@ function __fzf_files
           2>/dev/null |
         fzf \
           --ansi \
+          --info=inline-right \
           --preview='bat --style=numbers --color=always {}' \
-          --preview-window='right,70%,wrap,hidden,<200(bottom,50%,hidden)' \
+          --preview-window='right,70%,wrap,hidden,<100(bottom,50%,hidden)' \
           --bind='?:toggle-preview' \
           --expect='ctrl-e' \
           --header='ctrl-e to edit, ? to preview'
@@ -28,6 +29,7 @@ function __fzf_files
     switch $key
         case ctrl-e
             commandline -r "edit $file"
+            commandline -f execute
         case '*'
             commandline -i $file
     end
@@ -42,9 +44,10 @@ function __fzf_git_log
             git logsearch $argv |
             fzf \
               --ansi \
+              --info=inline-right \
               --tiebreak=index \
               --preview="git show {2} $argv | delta" \
-              --preview-window='right,70%,wrap,hidden,<200(bottom,50%,hidden)' \
+              --preview-window='right,70%,wrap,hidden,<100(bottom,50%,hidden)' \
               --bind='?:toggle-preview' \
               --header='? to preview'
         )
@@ -63,6 +66,7 @@ function __fzf_history
           --show-time="%Y-%m-%d$separator" |
         fzf \
           --read0 \
+          --info=inline-right \
           --tiebreak=index \
           --query=(commandline) \
           --preview='echo {3..}' \

fish/conf.d/sdk.fish

@@ -3,12 +3,23 @@
 # Makes command and binaries from SDKMAN! available in fish.
 # Delegates to bash for the `sdk` command.
 
-# Copyright (c) 2018 Raphael Reitzig
+# Copyright (c) 2018-2023 Raphael Reitzig
 # MIT License (MIT)
 # https://github.com/reitzig/sdkman-for-fish
 
-set __fish_sdkman_init "$HOME/.sdkman/bin/sdkman-init.sh"
-set __fish_sdkman_noexport_init "$HOME/.config/fisher/github.com/reitzig/sdkman-for-fish/sdkman-noexport-init.sh"
+# Account for custom install locations
+if set -q __sdkman_custom_dir
+    set -gx SDKMAN_DIR "$__sdkman_custom_dir"
+else
+    # This is the default location:
+    set -gx SDKMAN_DIR "$HOME/.sdkman"
+end
+
+set __fish_sdkman_init "$SDKMAN_DIR/bin/sdkman-init.sh"
+
+# Copied from https://github.com/jorgebucaran/fisher/blob/main/functions/fisher.fish to be consistent:
+set --query fisher_path || set --local fisher_path $__fish_config_dir
+set __fish_sdkman_noexport_init "$fisher_path/functions/__sdkman-noexport-init.sh"
 
 # Guard: SDKMAN! needs to be installed
 if not test -f "$__fish_sdkman_init"
@@ -42,7 +53,8 @@ function __fish_sdkman_run_in_bash
              echo -e \"\$?\" > $pipe;
              env | grep -e '^SDKMAN_\|^PATH' >> $pipe;
              env | grep -i -E \"^(`echo \${SDKMAN_CANDIDATES_CSV} | sed 's/,/|/g'`)_HOME\" >> $pipe;
-             echo \"SDKMAN_OFFLINE_MODE=\${SDKMAN_OFFLINE_MODE}\" >> $pipe" # it's not an environment variable!
+             echo \"SDKMAN_OFFLINE_MODE=\${SDKMAN_OFFLINE_MODE}\" >> $pipe;
+             echo \"SDKMAN_ENV=\${SDKMAN_ENV}\" >> $pipe" # it's not an environment variable!
     set bashDump (cat $pipe; rm $pipe)
 
     set sdkStatus $bashDump[1]
@@ -65,7 +77,7 @@ function __fish_sdkman_run_in_bash
 
             if test -n value
                 set -gx $var $value
-                # Note: This makes SDKMAN_OFFLINE_MODE an environment variable.
+                # Note: This makes SDKMAN_{OFFLINE_MODE,ENV} environment variables.
                 #       That gives it the behaviour we _want_!
             end
         end
@@ -77,8 +89,16 @@ end
 # If this is a subshell of a(n initialized) fish owned by the same user,
 # no initialization necessary.
 # Otherwise:
-if not set -q SDKMAN_DIR; or test (ls -ld "$SDKMAN_DIR" | awk '{print $3}') != (whoami)
-    set -e SDKMAN_DIR
+if not set -q SDKMAN_CANDIDATES_DIR; or test (ls -ld "$SDKMAN_CANDIDATES_DIR" | awk '{print $3}') != (whoami)
     __fish_sdkman_run_in_bash "source $__fish_sdkman_init"
 end
 
+# Set up auto_env
+if grep -q "^sdkman_auto_env=true" "$SDKMAN_DIR/etc/config"
+    function __fish_sdkman_autoenv --on-variable PWD
+        # Run the (modified) init script, which performs the checks and calls for us!
+        __fish_sdkman_run_in_bash "source \"$__fish_sdkman_noexport_init\""
+
+        set -x SDKMAN_OLD_PWD "$PWD" # needed by the Bash implementation
+    end
+end

fish/config.fish

@@ -49,9 +49,6 @@ if status --is-interactive
     # By default, Ctrl+L clears the screen
     # Add binding Ctrl+Alt+L to clear screen AND scrollback buffer
     bind \e\f 'clear; commandline -f repaint'
-
-    # Expand '...' to '../..'
-    bind . expand_dots
 end
 
 if not set -q __universals_initialized

fish/fish_plugins

@@ -2,4 +2,4 @@ jorgebucaran/fisher
 jorgebucaran/nvm.fish
 jorgebucaran/replay.fish
 lilyball/nix-env.fish
-reitzig/sdkman-for-fish@v1.4.0
+reitzig/sdkman-for-fish@v2.0.0

fish/functions/__sdkman-noexport-init.sh

@@ -0,0 +1,234 @@
+#!/usr/bin/env bash
+
+#
+#   Copyright 2021 Marco Vermeulen
+#
+#   Licensed under the Apache License, Version 2.0 (the "License");
+#   you may not use this file except in compliance with the License.
+#   You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#   Unless required by applicable law or agreed to in writing, software
+#   distributed under the License is distributed on an "AS IS" BASIS,
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#   See the License for the specific language governing permissions and
+#   limitations under the License.
+#
+
+# set env vars if not set
+if [ -z "$SDKMAN_VERSION" ]; then
+:
+fi
+
+if [ -z "$SDKMAN_CANDIDATES_API" ]; then
+:
+fi
+
+if [ -z "$SDKMAN_DIR" ]; then
+:
+fi
+
+# Load the sdkman config if it exists.
+if [ -f "${SDKMAN_DIR}/etc/config" ]; then
+	source "${SDKMAN_DIR}/etc/config"
+fi
+
+# infer platform
+function infer_platform() {
+	local kernel
+	local machine
+	
+	kernel="$(uname -s)"
+	machine="$(uname -m)"
+	
+	case $kernel in
+	Linux)
+	  case $machine in
+	  i686)
+		echo "LinuxX32"
+		;;
+	  x86_64)
+		echo "LinuxX64"
+		;;
+	  armv6l)
+		echo "LinuxARM32HF"
+		;;
+	  armv7l)
+		echo "LinuxARM32HF"
+		;;
+	  armv8l)
+		echo "LinuxARM32HF"
+		;;
+	  aarch64)
+		echo "LinuxARM64"
+		;;
+	  *)
+	  	echo "Exotic"
+	  	;;
+	  esac
+	  ;;
+	Darwin)
+	  case $machine in
+	  x86_64)
+		echo "DarwinX64"
+		;;
+	  arm64)
+		if [[ "$sdkman_rosetta2_compatible" == 'true' ]]; then
+			echo "DarwinX64"
+		else
+			echo "DarwinARM64"
+		fi
+		;;
+	  *)
+	  	echo "DarwinX64"
+	  	;;
+	  esac
+	  ;;
+	*)
+	  echo "$kernel"
+	esac
+}
+
+SDKMAN_PLATFORM="$(infer_platform | tr '[:upper:]' '[:lower:]')"
+:
+
+# OS specific support (must be 'true' or 'false').
+cygwin=false
+darwin=false
+solaris=false
+freebsd=false
+SDKMAN_KERNEL="$(uname -s)"
+case "${SDKMAN_KERNEL}" in
+	CYGWIN*)
+		cygwin=true
+		;;
+	Darwin*)
+		darwin=true
+		;;
+	SunOS*)
+		solaris=true
+		;;
+	FreeBSD*)
+		freebsd=true
+esac
+
+# Determine shell
+zsh_shell=false
+bash_shell=false
+
+if [[ -n "$ZSH_VERSION" ]]; then
+	zsh_shell=true
+elif [[ -n "$BASH_VERSION" ]]; then
+	bash_shell=true
+fi
+
+# Source sdkman module scripts and extension files.
+#
+# Extension files are prefixed with 'sdkman-' and found in the ext/ folder.
+# Use this if extensions are written with the functional approach and want
+# to use functions in the main sdkman script. For more details, refer to
+# <https://github.com/sdkman/sdkman-extensions>.
+OLD_IFS="$IFS"
+IFS=$'\n'
+scripts=($(find "${SDKMAN_DIR}/src" "${SDKMAN_DIR}/ext" -type f -name 'sdkman-*.sh'))
+for f in "${scripts[@]}"; do
+	source "$f"
+done
+IFS="$OLD_IFS"
+unset OLD_IFS scripts f
+
+# Create upgrade delay file if it doesn't exist
+if [[ ! -f "${SDKMAN_DIR}/var/delay_upgrade" ]]; then
+	touch "${SDKMAN_DIR}/var/delay_upgrade"
+fi
+
+# set curl connect-timeout and max-time
+if [[ -z "$sdkman_curl_connect_timeout" ]]; then sdkman_curl_connect_timeout=7; fi
+if [[ -z "$sdkman_curl_max_time" ]]; then sdkman_curl_max_time=10; fi
+
+# set curl retry
+if [[ -z "${sdkman_curl_retry}" ]]; then sdkman_curl_retry=0; fi
+
+# set curl retry max time in seconds
+if [[ -z "${sdkman_curl_retry_max_time}" ]]; then sdkman_curl_retry_max_time=60; fi
+
+# set curl to continue downloading automatically
+if [[ -z "${sdkman_curl_continue}" ]]; then sdkman_curl_continue=true; fi
+
+# read list of candidates and set array
+SDKMAN_CANDIDATES_CACHE="${SDKMAN_DIR}/var/candidates"
+SDKMAN_CANDIDATES_CSV=$(<"$SDKMAN_CANDIDATES_CACHE")
+__sdkman_echo_debug "Setting candidates csv: $SDKMAN_CANDIDATES_CSV"
+if [[ "$zsh_shell" == 'true' ]]; then
+	SDKMAN_CANDIDATES=(${(s:,:)SDKMAN_CANDIDATES_CSV})
+else
+	IFS=',' read -a SDKMAN_CANDIDATES <<< "${SDKMAN_CANDIDATES_CSV}"
+fi
+
+:
+
+for candidate_name in "${SDKMAN_CANDIDATES[@]}"; do
+	candidate_dir="${SDKMAN_CANDIDATES_DIR}/${candidate_name}/current"
+	if [[ -h "$candidate_dir" || -d "${candidate_dir}" ]]; then
+:
+:
+	fi
+done
+unset candidate_name candidate_dir
+:
+
+# source completion scripts
+if [[ "$sdkman_auto_complete" == 'true' ]]; then
+	if [[ "$zsh_shell" == 'true' ]]; then
+		# initialize zsh completions (if not already done)
+		if ! (( $+functions[compdef] )) ; then
+			autoload -Uz compinit
+			if [[ $ZSH_DISABLE_COMPFIX == 'true' ]]; then
+				compinit -u -C
+			else
+				compinit
+			fi
+		fi
+		autoload -U bashcompinit
+		bashcompinit
+		source "${SDKMAN_DIR}/contrib/completion/bash/sdk"
+		__sdkman_echo_debug "ZSH completion script loaded..."
+	elif [[ "$bash_shell" == 'true' ]]; then
+		source "${SDKMAN_DIR}/contrib/completion/bash/sdk"
+		__sdkman_echo_debug "Bash completion script loaded..."
+	else
+		__sdkman_echo_debug "No completion scripts found for $SHELL"
+	fi
+fi
+
+if [[ "$sdkman_auto_env" == "true" ]]; then
+	if [[ "$zsh_shell" == "true" ]]; then
+		function sdkman_auto_env() {
+			if [[ -n $SDKMAN_ENV ]] && [[ ! $PWD =~ ^$SDKMAN_ENV ]]; then
+				sdk env clear
+			fi
+			if [[ -f .sdkmanrc ]]; then
+				sdk env
+			fi
+		}
+
+		chpwd_functions+=(sdkman_auto_env)
+	else
+		function sdkman_auto_env() {
+			if [[ -n $SDKMAN_ENV ]] && [[ ! $PWD =~ ^$SDKMAN_ENV ]]; then
+				sdk env clear
+			fi
+			if [[ "$SDKMAN_OLD_PWD" != "$PWD" ]] && [[ -f ".sdkmanrc" ]]; then
+				sdk env
+			fi
+
+:
+		}
+		
+		trimmed_prompt_command="${PROMPT_COMMAND%"${PROMPT_COMMAND##*[![:space:]]}"}"
+		[[ -z "$trimmed_prompt_command" ]] && PROMPT_COMMAND="sdkman_auto_env" || PROMPT_COMMAND="${trimmed_prompt_command%\;};sdkman_auto_env"
+	fi
+
+	sdkman_auto_env
+fi

fish/functions/battery.fish

@@ -1,16 +0,0 @@
-function battery --description "Print battery status"
-    if test (uname -s) != Darwin
-        echo "Unsupported kernel: "(uname -s)
-    else
-        set --local battery_status (pmset -g batt | string split0)
-        set --local battery_charge (echo $battery_status | rg --only-matching "\d+%")
-        set --local power_source (echo $battery_status | rg --only-matching  "[A-Za-z]+\sPower")
-
-        set_color green
-        echo "⚡️ Running on $power_source with $battery_charge charge"
-        set_color normal
-    end
-
-    # Repaint is needed since there is a keybinding for this function
-    commandline -f repaint
-end

fish/functions/expand_dots.fish

@@ -1,12 +0,0 @@
-# https://github.com/nickeb96/puffer-fish
-function expand_dots -d 'Expand ... to ../..'
-    set -l item (string split ' ' (commandline --cut-at-cursor))[-1]
-    switch $item
-        case './*'
-            commandline --insert '.'
-        case '*..'
-            commandline --insert '/..'
-        case '*'
-            commandline --insert '.'
-    end
-end

fish/functions/fisher.fish

@@ -1,6 +1,6 @@
 function fisher --argument-names cmd --description "A plugin manager for Fish"
     set --query fisher_path || set --local fisher_path $__fish_config_dir
-    set --local fisher_version 4.4.3
+    set --local fisher_version 4.4.4
     set --local fish_plugins $__fish_config_dir/fish_plugins
 
     switch "$cmd"
@@ -13,8 +13,8 @@ function fisher --argument-names cmd --description "A plugin manager for Fish"
             echo "       fisher update                Update all installed plugins"
             echo "       fisher list    [<regex>]     List installed plugins matching regex"
             echo "Options:"
-            echo "       -v or --version  Print version"
-            echo "       -h or --help     Print this help message"
+            echo "       -v, --version  Print version"
+            echo "       -h, --help     Print this help message"
             echo "Variables:"
             echo "       \$fisher_path  Plugin installation path. Default: $__fish_config_dir" | string replace --regex -- $HOME \~
         case ls list
@@ -98,7 +98,7 @@ function fisher --argument-names cmd --description "A plugin manager for Fish"
 
                         echo Fetching (set_color --underline)\$url(set_color normal)
 
-                        if curl --silent -L \$url | tar -xzC \$temp -f - 2>/dev/null
+                        if command curl -q --silent -L \$url | command tar -xzC \$temp -f - 2>/dev/null
                             command cp -Rf \$temp/*/* $source
                         else
                             echo fisher: Invalid plugin name or host unavailable: \\\"$plugin\\\" >&2

fish/functions/sdk.fish

@@ -1,3 +1,9 @@
+# Wrapper function for SDKMAN!
+
+# Copyright (c) 2018-2023 Raphael Reitzig
+# MIT License (MIT)
+# https://github.com/reitzig/sdkman-for-fish
+
 function sdk -d "Manage SDKs"
     # Guard: SDKMAN! needs to be installed
     if not test -f "$__fish_sdkman_init"

git/config

@@ -35,13 +35,12 @@
 	plus-emph-style               = bold green 22
 	zero-style                    = dim syntax
 [diff]
+	algorithm = histogram
 	colorMoved = default
 [interactive]
 	diffFilter = delta --color-only
 [log]
 	date = human
-[merge]
-	conflictStyle = zdiff3
 [pull]
 	rebase = true
 [push]

nix/packages.nix

@@ -5,6 +5,7 @@
 with import <nixpkgs> {}; [
     bat
     delta
+    direnv
     duf
     du-dust
     fd
@@ -15,6 +16,7 @@ with import <nixpkgs> {}; [
     git-repo-updater
     helix
     jq
+    just
     less
     macchina
     nix